Pinball v3 - mid booster & tilt EQ
The version 3 Pinball mid booster + tilt EQ pedal features a mode switch to toggle between mid booster mode (original Standout) and tilt EQ mode (original Pinball). I had to fix a typo in the text graphic, which didn't come out cleanly (see pictures). The rest of the pedal is brand new and works perfectly.
The mid boosting mode is derived from the Standout circuit.
LEVEL - controls the output of the pedal. There is PLENTY of clean boost on tap! BLEND - in mid boost mode, this blends the EQ with a dry signal. In tilt EQ mode, it blends the HPF with the LPF. HPF - varies the frequency cutoff point of the high pass filter(s), from 47 Hz to 4.0 kHz. LPF - varies the frequency cutoff point of the low pass filter(s), from 230 Hz to 19.5 kHz 6dB/12dB - toggles between first-order (6dB) and second-order (12dB) filters. POWER - Accepts the industry-standard 2.1mm pin, 5.5mm barrel, negative-tip power supply. The pedal accepts voltage ranges from 9V up to 15V.
Controls
MAKEUP - This internal trimpot sets the makeup gain between the HPF and LPF. Active only in mid boost mode. BUFFER/TRUE - this internal switch selects between buffered and true bypass switching. LED - This internal trimpot affects the brightness of the LED indicator. DUALMODE - Wait 3 seconds and press tap + tap + hold for 3 seconds with the footswitch to activate or deactivate momentary mode.
Warranty & Returns
Try any VFE Pedal risk-free for 30 days. Return it in new condition within the first 30 days for any reason and get a full refund! All pedals assembled by VFE Pedals have a 1-year warranty on parts & labor. I will continue to offer repair service for out-of-warranty products indefinitely, even after I close down at the end of 2026.